Select Page

Sleeping Child Check Monitor®

Download the Brochure

Avoid the fear and anguish experienced by parents, bus drivers, and the school district from a child being lost or injured after being left alone on a bus. To eliminate these occurrences, Doran Mfg. strongly believes the Sleeping Child Check Monitor® should be an industry safety standard. This device reminds the driver to move to the rear of the bus to conduct a search for any child that may be left behind before exiting.

How It Works

Our Sleeping Child Check Monitor® works in three simple steps:

  1. Warning lights are activated when children enter the bus.
  2. The Sleeping Child Check Monitor® is turned on and becomes engaged when the ignition of the bus is turned off.
  3. In order to deactivate the monitor, the bus driver must move to the back of the bus and depress a button on the monitor.
  4. If a driver fails to deactivate the monitor and exits a door, the horn will sound reminding him or her to check for any sleeping children on the bus.

The Sleeping Child Check Monitor® (Doran part # SCC-AM) by Doran Mfg. is easy to install and its heavy duty construction prevents breakage.

Common Questions

When does the monitor activate?
The monitor activates when the warning lights are turned on.

Where is the switch mounted?
The switch is mounted at the rear of the bus. If there is an emergency exit door at the rear, the monitor is mounted above it. This prevents the driver from deactivating the monitor from the outside of the bus.

Is the monitor available only for new buses?
The Sleeping Child Check Monitor® can be installed on new buses and is available as an